Plumbers: 3 Probable Causes Behind Low Pressure In Your Showerhead

28 January 2016
 Categories: , Blog


Reduced pressure in your showerhead is an incredible source of frustration because it denies you the opportunity to have a relaxing hot shower after a long day at work. While you will need to call professional plumbers to fix the problem, it pays to be aware of the cause of the low-pressure problem. This will help you better inform the plumber before he arrives, so he can bring the right tools and equipment for your job. 

Worn Out Pipes

Over time, your pipes may start to corrode, rust and wear out, especially if the quality of water is poor in your area. These worn out pipes will cause rust debris to flow along with the water and into your showerhead, which may end up blocking it and compromising its pressure. If your pipes are located within your walls, it may be hard to tell whether they are corroded. But if they are located outside your walls, then you will notice signs of rust and corrosion easily. Worn out pipes will need to be replaced by plumbers to restore proper pressure in your shower.

Inadequate Plumbing Pipes

If the pipes aren't sufficient enough to meet the increased load of plumbing fixtures in your house, then you can expect low showerhead pressure. Simply turning on the shower and closing all other taps in your home will help you easily spot this problem. If you turn on the shower in isolation, you may notice good pressure. But you may find that the shower pressure decreases when you turn on another tap. This is a clear indication of inadequate plumbing pipes in your home. This problem usually occurs if you add new plumbing fixtures to your home. In this case, your plumbers will need to replace existing pipes with wider ones for enhanced showerhead pressure.

Leaking Pipes

Leaking pipes may also decrease the supply of water to your shower, which will result in reduced showerhead pressure. When you notice signs of leakage around your shower like mould or water pools, be sure to check your pipes thoroughly. If diagnosed early, you will be able to tackle a small leak on your own using an industry-grade sealant from your local home improvement store to close up the hole. If the leak is too big, professional plumbers will need to inspect the pipes to assess whether they can be repaired or whether they need complete replacement.

Getting qualified plumbers to address your low showerhead pressure problem instantly will enable you to enjoy a full-force shower quicker.


Share